Heatstrip Elegance 3600 Watt

Wire mounting bracket for Heatstrip Elegance in white

Features

• Allows for a movable patio heater

Compatible with:

• Elegance 1800, 2400 and 3600W

Extension mount bracket to Heatstrip Design 

Enables the joining of multiple amplifiers in a small line, which can be done with an extension rod, for maximum heat output.

• The bracket allows a gap of 50 mm between units and the opening for the power connection.
• Brackets can be used for ordinary ceiling, wall mounting or extension brackets.

Extension mount bracket to Heatstrip Intense

The extension brackets designed for Heatstrip Intense will help you to hang the heater exact where you want it to be. The brackets are available with 25 x 25 x 1mm tubes, and can only be supplied as fittings for adjustments to the length or the cut. They can also be supplied as a complete set of fittings, pre-cuts rods and connectors.

• Available in different lengths.
• The mount brackets contain brackets, pre-cut rods and connectors.

Extension mount bracket to Heatstrip Intense

The extension brackets designed for Heatstrip Intense will help you to hang the heater exact where you want it to be. The brackets are available with 25 x 25 x 1mm tubes, and can only be supplied as fittings for adjustments to the length or the cut. They can also be supplied as a complete set of fittings, pre-cuts rods and connectors.

• Available in different lengths.
• The mount brackets contain brackets, pre-cut rods and connectors.

Extension mount bracket to Heatstrip Intense

The extension brackets designed for Heatstrip Intense will help you to hang the heater exact where you want it to be. The brackets are available with 25 x 25 x 1mm tubes, and can only be supplied as fittings for adjustments to the length or the cut. They can also be supplied as a complete set of fittings, pre-cuts rods and connectors.

• Available in different lengths.
• The mount brackets contain brackets, pre-cut rods and connectors.

Extension mount bracket to Heatstrip Intense

The extension brackets designed for Heatstrip Intense will help you to hang the heater exact where you want it to be. The brackets are available with 25 x 25 x 1mm tubes, and can only be supplied as fittings for adjustments to the length or the cut. They can also be supplied as a complete set of fittings, pre-cuts rods and connectors.

• Available in different lengths.
• The mount brackets contain brackets, pre-cut rods and connectors.

Heatstrip Elegance 3600 Flush mount enclosure

Features

• Designed for use indoors and outdoors
• Easy to install
• Designed for the Heatstrip Elegance 3600
• Size: 119 x 29 x 12.5 cm
• Screws for mounting not included

Installation

• Recommended mounting height: 2.3-2.5 metres
• Maximum mounting height: 2.7 metres

Remote timer

Features

• Select heat settings between: High (100%), Medium (70%) and Low (40%).
• Automatic timer control e.g. 1, 2 or 4 hours.
• Can also be used for multiple heaters.
• Remote control included.
• Must be installed by a licensed electrician.

Included in delivery

• Remote controller
• Control panel for wall

Switch and remote control with timer for Heatstrip

Make the operation of Heatstrip heaters easier with remote control. With the remote and switch, you are able to time, as well as turn on/off, all of your Heatstrip patio heaters every 1, 2 or 4 hours. The remote control has a range of 10 meters, making it easy to switch a heater on without having to move.

This remote control can be used for one or more Heatstrip patio heaters, as long as the total power usage does not exceed 16 amps and 220-240V.

Features

• Timer function: 1, 2, or 4 hours
• Can be used for multiple Heatstrip heating units
• Switch can be installed by a licensed electrician
• Must be installed a place without humidity

Included in delivery

• Remote controller
• Wall switch